Technical specification Series: DN/DW Flow rate: 4.7 to 194.2 m³/min Pressure dewpoint: down to -40 °C Compressed air dried to dewpoints as low as -40°C is often needed as process air, for frost-prone areas or in sensitive industries such as electronics, foodstuffs, pharmaceuticals and brewing. Such high degrees of moisture removal are achieved by KAESER’s series DN/DW desiccant dryers. The use of heat regeneration ensures that very little compressed air is needed for purging (DN 0%,[...]

Technical specification Series: DA Flow rate: 1.15 to 154.53 m³/min Pressure dewpoint: down to -70 °C The KAESER Pure Air System is able to achieve a high degree of cleanliness and dryness in compressed air. The system comprises a centrifugal separator, a microfilter, a prefilter (as additional security), a heatless regenerated desiccant dryer, an activated carbon adsorber and a particulate filter all built into a common housing and interconnected for instant use. Class 1 purity to ISO[...]

W dzisiejszym przemyśle zapotrzebowanie na sprężone powietrze przeważnie pokrywają sprężarki śrubowe. Sprężarki śrubowe firmy KAESER KOMPRESSOREN odzwierciedlają ten rozwój w wywołujący głębokie wrażenie sposób. Na całym świecie pracuje obecnie ponad 120 000 tych ekonomicznych i niezawodnych maszyn. Najważniejsze zalety sprężarek KAESER KOMPRESSOREN : - Blok sprężarki z profilem SIGMA Każdy blok sprężarki jest skonstruowany i wykonany z wysoką precyzją wyłącznie[...]

Power-saving pressure band control Keeping the compressors working within a narrow pressure band and being able to recognise and accomodate demand trends is the ideal way to avoid unneccessarily high final pressure. Investment is quickly repaid because lowering maximum pressure by just one bar means 6 percent less compressor power consumption and 25 percent less air loss through leaks in the air network. Simple operation Logically structured menus in plain text and a number of preassigned[...]

Air Management Efficient and reliable control of an air system demands a comprehensive exchange of data between the master controller and the internal compressor controller. High performance and a large memory capacity are the main features of the industrial computer that is the heart of SIGMA AIR MANAGER. The master Profibus DP interface needs only a single cable for fast and safe exchange of large data volume with SIGMA CONTROL, the internal controller in the packaged compressor, which has a slave[...]

Technical specification Versions: Basic + D-Pack Flow rate: 0.58 to 248 m³/min Pressure: 16 bar high pressure to 62 bar Every cubic metre of atmospheric air sucked into a compressor contains on average about 190 million particles of dirt, hydrocarbons, viruses and bacteria, the majority of which is carried through into the compressed air. Most applications require this air to be clean, and, depending on purity requirements, there are appropriate KAESER filters to suit. The range extends[...]

Specifications Series KMM Inlet flow volume 0.018 bis 4.633 m³/min Patented Efficiency With a US patent and a European patent pending, the new KMM Membrane Dryer is turning heads for several reasons. The ‘Inflow Concept’ ensures outstanding drying results through highly effective moisture removal, enhanced pressure stability and reduced differential pressure. The design also provides protection from any contamination that may enter the dryer, as it is trapped before it can reach the[...]

Rotary screw compressors with V-belt drive to 22 kW Technical specification SX – ASK series Motor powers from 2.2 to 22 kW FADs from 0.233 to 3.5 m³/min Standard pressures 5.5 -15 bar The flexible KAESER V-belt drive KAESER screw compressors with V-belt drive are convincing in their economy, efficiency and reliability. In fact KAESER was one of the first compressor manufacturers to implement V-belt drive. An important feature is the automatic tensioning device, which ensures constantly[...]

Rotary screw compressor with 1:1 drive to 250 kW Technical specification ASD to ESD series FADs from 2.09 to 42 m³/min, Motor powers from 18.5 to 250 kW, Standard pressures 5.5 to 15 bar Why 1:1 drive? 1:1 drive means that the airend and motor are directly connected. This means that there are no transmission losses. Kaeser’s directly driven screw compressors deliver outstanding performance and make possible great savings in energy. A prerequisite of direct drive is the availability[...]

Rotary screw compressors with V-belt drive to 450 kW Specifications FS to HS series FADs from 35 to 79.2 m³/min, Motor powers from 250 to 450 kW, Standard pressures 7.5/10/13 bar Designing for high air demand Sometimes, depending on the application, compressed air supply systems are highly complex. They can only be efficiently operated over the long term if just as much importance is placed on this fact during the design, extension or modernisation as it is during daily operation. With[...]